Sonifex
SKU
RB-DA24MD
Sonifex 24 Way Mono Distribution Amp with Input Gain Control
veil. inkl. MVA. veil eks. MVA
Din pris per Stk Veil. per Stk inkl. mva. eks. MVA.
Kontakt vår ekspert om dette produktet
Aksel E. Holand
Aksel er merkevareansvarlig for Klotz, Neutrik, Sonifex og Ambient.
aeh@benum.com +47 970 55 952 send e-postRB-DA24MD 24 Way Mono Audio Distribution Amplifier
The RB-DA24MD is a 1U rack mount high performance 24 way audio distribution amplifier. It has 2 inputs which can be each individually routed to 12 outputs, or mixed and routed to all 24 outputs. The inputs can be configured as either dual mono, input 1 routed to outputs 1-12 and input 2 routed to outputs 13-24, or mixed-mono, inputs 1 and 2 mixed at a pre-set level and routed to all 24 outputs. When set to mixed-mono operation there are 3 different output mix level modes, enabled by altering internal jumpers, providing -6dB, -3dB or 0dB adjustment of the output.The XLR inputs and D-type outputs are electronically balanced and can be wired unbalanced. Each output is individually buffered so that a short circuit on one wont affect the others. Each output is also protected against connection to both POE (power over Ethernet) and phantom power circuits.
The RB-DA24MD has master gain controls for both input 1 and input 2 which are pre-set potentiometers accessible through the rear panel. These controls allow the gain to be adjusted from -15dB to +15dB, useful for normalising consumer to professional signals and vice versa. An LED power indicator on the front panel shows that the unit is powered.
A 125Hz 6dB per octave roll off filter is activated by a push switch on the rear panel. When selected the filter is the applied to both inputs.
Technical Specification For RB-DA24MD | |
Audio Specification | |
Input impedance: | > ,20k&Omega , bridging (balanced) |
Output impedance: | < ,50&Omega , |
Maximum Input Level: | +28dBu |
Maximum Output Level: | +28dBu |
Frequency Response: | 20Hz to 20kHz ± ,0.1dB (600&Omega , load, ref 1kHz) |
Gain Range: | Adjustable -15dB loss to +15dB gain |
Common Mode Rejection: | > ,66dB typically |
LF Roll Off Filter  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  , : | 125Hz at 6dB/octave |
Distortion: | 0.01%THD @ 1kHz, red + 8dBu output |
Noise: | -100dB unity gain, ref +8dBu output |
  , |   , |
Connections | |
Inputs: | 2 x XLR 3 pin female (balanced) |
Outputs: | 2 x 25 way D-type plug (balanced, can be unbalanced) |
Mains Input: | Filtered IEC, switchable 110-120V, or 220-240V, fused, 12W maximum |
Fuse Rating: | Anti-surge fuse 100mA 20 x 5mm (230VAC) Anti-surge fuse 250mA 20 x 5mm (115VAC) |
  , |   , |
Equipment Type | |
RB-DA24MD:  ,  ,  ,  ,  , | 24 way mono distribution amplifier |
  , |   , |
Physical Specification | |
Dimensions (Raw): | 48cm (W) x 15.8cm (D) x 4.2 (H) (1U) 19&rdquo , (W) x 6.2&rdquo , (D) x 1.7&rdquo , (H) (1U) |
Dimensions (Boxed): | 58.5cm (W) x 27.4cm (D) x 10.8cm (H) 23&rdquo , (W) x 10.9&rdquo , (D) x 4.3&rdquo , (H) |
Weight: | Nett: 1.6kg  ,   ,  ,  ,  ,  ,Gross: 2.2kg Nett: 3.5lbs   ,  ,  ,  ,  ,Gross: 4.8lbs |
SKU | RB-DA24MD |
---|---|
Vekt (kg) | 0.050000 |
Enhet | Stk |
Fabrikant | Sonifex |
Produktserie | RedBox |
RB-DA24MD 24 Way Mono Audio Distribution Amplifier
The RB-DA24MD is a 1U rack mount high performance 24 way audio distribution amplifier. It has 2 inputs which can be each individually routed to 12 outputs, or mixed and routed to all 24 outputs. The inputs can be configured as either dual mono, input 1 routed to outputs 1-12 and input 2 routed to outputs 13-24, or mixed-mono, inputs 1 and 2 mixed at a pre-set level and routed to all 24 outputs. When set to mixed-mono operation there are 3 different output mix level modes, enabled by altering internal jumpers, providing -6dB, -3dB or 0dB adjustment of the output.The XLR inputs and D-type outputs are electronically balanced and can be wired unbalanced. Each output is individually buffered so that a short circuit on one wont affect the others. Each output is also protected against connection to both POE (power over Ethernet) and phantom power circuits.
The RB-DA24MD has master gain controls for both input 1 and input 2 which are pre-set potentiometers accessible through the rear panel. These controls allow the gain to be adjusted from -15dB to +15dB, useful for normalising consumer to professional signals and vice versa. An LED power indicator on the front panel shows that the unit is powered.
A 125Hz 6dB per octave roll off filter is activated by a push switch on the rear panel. When selected the filter is the applied to both inputs.
Technical Specification For RB-DA24MD | |
Audio Specification | |
Input impedance: | > ,20k&Omega , bridging (balanced) |
Output impedance: | < ,50&Omega , |
Maximum Input Level: | +28dBu |
Maximum Output Level: | +28dBu |
Frequency Response: | 20Hz to 20kHz ± ,0.1dB (600&Omega , load, ref 1kHz) |
Gain Range: | Adjustable -15dB loss to +15dB gain |
Common Mode Rejection: | > ,66dB typically |
LF Roll Off Filter  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  , : | 125Hz at 6dB/octave |
Distortion: | 0.01%THD @ 1kHz, red + 8dBu output |
Noise: | -100dB unity gain, ref +8dBu output |
  , |   , |
Connections | |
Inputs: | 2 x XLR 3 pin female (balanced) |
Outputs: | 2 x 25 way D-type plug (balanced, can be unbalanced) |
Mains Input: | Filtered IEC, switchable 110-120V, or 220-240V, fused, 12W maximum |
Fuse Rating: | Anti-surge fuse 100mA 20 x 5mm (230VAC) Anti-surge fuse 250mA 20 x 5mm (115VAC) |
  , |   , |
Equipment Type | |
RB-DA24MD:  ,  ,  ,  ,  , | 24 way mono distribution amplifier |
  , |   , |
Physical Specification | |
Dimensions (Raw): | 48cm (W) x 15.8cm (D) x 4.2 (H) (1U) 19&rdquo , (W) x 6.2&rdquo , (D) x 1.7&rdquo , (H) (1U) |
Dimensions (Boxed): | 58.5cm (W) x 27.4cm (D) x 10.8cm (H) 23&rdquo , (W) x 10.9&rdquo , (D) x 4.3&rdquo , (H) |
Weight: | Nett: 1.6kg  ,   ,  ,  ,  ,  ,Gross: 2.2kg Nett: 3.5lbs   ,  ,  ,  ,  ,Gross: 4.8lbs |
SKU | RB-DA24MD |
---|---|
Vekt (kg) | 0.050000 |
Enhet | Stk |
Fabrikant | Sonifex |
Produktserie | RedBox |
Validate your login
Logg inn
Create New Account